Call 1300 206 097
Request Quote
DIY Shutter Order

How to Install Face Fix Curtains

Installations can vary slightly so be sure to follow the instructions carefully on the sheet provided.

Your curtains will arrive ready to go so it’s a good idea to first check you have all the parts by identifying them on the instruction sheet provided. 

  • You will require a drill, a phillips head screwdriver and 2 mounting screws per bracket.
An instructional diagram illustrating curtain track hardware components

Step 1

  • Position two mounting brackets for fixing at approximately 150mm from each end of the track.

In most scenarios, the screws provided will be suitable to mount the brackets. However, if you need to fix the blind to a window lintel or into masonry, you may need to source more appropriate screws and plugs. 

  • Fasten these brackets to the wall with screws appropriate for your wall material, ensuring the brackets are level.
  • Position any remaining brackets between the end brackets evenly.
A technical diagram for installing a wall-mounted curtain track

Step 2 (if track is split)

If your custom track has been delivered in two parts then you’ll need to join them. Follow our simple instructions here!

  • First, slide the joiner piece half way though one length of track.
  • Then slide the second length of track over the exposed half of the joiner.
  • Use the supplied hexy key to tighten the grub screws, fixing the track firmly together
A line diagram showing a curtain track joiner being slid into the end of a track section
A line diagram showing a second curtain track section being slid onto the exposed end of a joiner
A line diagram showing how to secure two joined curtain track sections by tightening four grub screws with a hex key

Step 3

  • Clip the track into the brackets by slotting the back of the track between the metal and the plastic clip and fasten into place with the screw.
A line diagram showing a curtain track section being aligned with a wall-mounted bracket
A side-profile line diagram showing a curtain track being pushed upward into a wall-mounted bracket to snap it into place

Step 4

  • Clip the bracket caps over the brackets and connect the hand wand to the opening side of the track. This is usually hooked onto a dedicated loop inside the first runner. Otherwise, hook it onto the first runner on the opening side.
A line diagram showing a bracket cap being slid horizontally onto a wall-mounted bracket
A line diagram showing a curtain being hung on a track, with a green arrow indicating a hook being inserted into a glider

Step 5

  • To hang the curtain, simply use the hooks on the back of the curtain to loop through the runners.
  • In the case of S-Fold curtains, the hooks on the back of the curtain, should be clipped in, then around, then underneath each runner to achieve the wave effect.
A line diagram showing an S-fold curtain being hung on a track

View Our Aluminium Shutters

One of the sleekest window covering options on the market, aluminium shutters have a smooth ultra-modern look while being made to last. 

View Products