Call 1300 206 097
Request Quote
DIY Shutter Order

How to Install Panel Glide Blinds

  • Firstly, check all parts have been supplied before you begin to assemble your new Panel Glide.
  • Attach the installation Bracket to the underside of the long end of the Outside Mount L Bracket, and secure with the nut and bolt provided.
  • Use a pencil to mark where you’re going to fasten the bracket and then drill holes smaller in diameter than the required screws.
A technical line drawing showing the assembly of an L-bracket for an outside mount
A technical line drawing showing how to snap a metal installation bracket onto a blind headrail
  • Make sure they’re spaced evenly and ensure they’re level.
  • Position the track into the front edge of the installation bracket and gently push upwards until it clicks into place.
  • Attach the panels to the Velcro ensuring they are parallel to each other.
  • Finally, attach the wand to the lead panel.

To operate the blind successfully, attach the wand to the lead panel (choose the front or back locating hole to suit), and draw smoothly across the track. 

A technical line drawing titled "PARTS INCLUDED" displaying five labelled components for window blind assembly

View Our Motorised Roller Blinds

There are a huge range of roller blinds to choose from, but their ability to be motorised and automated is a particularly strong draw card for many.

View Products